Description
| Area | Interior |
| Recommended Use | Interior wooden floors and furniture |
| Base | Oil-Based |
| Coverage | Up to 24m² per litre |
| Drying Time | 8-10 Hours |
| Re-Coat Time | 8-10 Hours |
| Recommended Coats | 1-2 Coat |
| Application Method | Brush or Roller |
| VOC Levels | High |
Always test a small area of the surface to be treated before application to ensure you are happy with the finished look.
- Stir well before use.
- Osmo Polyx Oil is ready to use and does not require thinning.
- Use an Osmo Soft Tip Flat Brush, floor brush, or microfibre roller.
- Apply thinly working in the direction of the wood grain and spread well.
- Allow to dry for 8-10 hours under good ventilation.
- After drying quickly apply a second coat.
- If re-coating one coat should be sufficient.
Note: Always follow the manufacturer’s instructions found on the tin.
Always ensure the surface is clean, grease-free and clear from dust.
- Clean old microporous stains (wood oils).
- Old paints and lacquers must be completely removed this can be done by sanding back or using a suitable chemical stripper.
- Sand the surface carefully, starting with a coarse sandpaper and finish fine grade. For flooring 120-150 and for furniture 180-240.
- Before application ensure all dust has been removed.
High V.O.C
